Engineered Precast Products

We take responsibility for our work

Our engineering team can work with you to design the exact precast concrete and steel products you need to achieve your project objectives. With DECAST you get higher quality, long asset life and leading engineered precast solutions.

Box Culverts (DECAST Design)

  • Conveyance of storm water from urban developments
  • Designed for gravity flow of fluids
  • Can be used as small bridges and for stream crossings
  • Culverts designed to fit job site requirements
  • Filter fabric or butyl rubber gaskets included for joints

Dimensions:

Standard length of sections: 2.5m

Standard(s) Reference:

Designed to the Canadian Highway Bridge Design Code (CHBDC)

Features on Request:

Reducers/Increasers, Radius Box Sections, Bends, Skewed or Flush End Sections, Hole to Accept Maintenance Riser

Box Culverts (OPSS Design)

  • Conveyance of storm water from urban developments
  • Designed for gravity flow of fluids
  • Can be used as small bridges and for stream crossings
  • Culverts designed to fit job site requirements
  • Filter fabric or butyl rubber gaskets included for joints

Standard(s) Reference:

Designed to OPSS 1821 and the Canadian Highway Bridge Design Code (CHBDC)

Features on Request:

Reducers/Increasers, Radius Box Sections, Bends, Skewed or Flush End Sections, Hole to Accept Maintenance Riser

Utility Chambers

  • Eliminates expensive formwork
  • Chamber for watermain valves/meters, electrical vaults, oil/grit separators, septic tanks, lift station wet wells, storage tanks, stormwater management
  • Chambers designed to fit job site requirements
  • Swift anchors included
  • Joints sealed with butyl rubber gasket

Standard(s) Reference:

Designed to OPSD 1101.012, 1101.016 and 405.010, OPSS 407 and 516

Features on Request:

Reducers/Increasers, Radius Box Sections, Bends, Skewed or Flush End Sections, Hole to Accept Maintenance Riser

Meter Chambers

  • Housing chambers for watermain meters which monitor inflow/outflow
  • Chambers are composed of a monotop placed on a monobase
  • Chambers designed to fit job site requirements
  • Swift anchors included
  • Joints sealed with butyl rubber gasket

Standard(s) Reference:

Designed to OPSD 1108.010

Box Maintenance Holes

Maintenance holes for large pipe sizes, when round maintenance holes cannot be used

  • Used as Pumping Stations, Control Structures and Wet Wells
  • Consist of a mono base, a number of risers (to suit depth) and a monotop
  • Maintenance Holes designed to fit job site requirements
  • Swift anchors included
  • Joints are sealed with butyl mastic sealant

Standard(s) Reference:

Designed to CSA A23.4, OPSD 405.010 and the Canadian Highway Bridge Design Code (CHBDC)

Features on Request:

Sump (300x300x150), Cast-in openings in monobase and monotop

City of Toronto & Peel Region Chambers

  • City of Toronto: T-1108.01-1 Water Meter Chamber
  • City of Toronto: T-1107.02-2 Water Meter Chamber
  • City of Toronto: T-1108.01-3 Double Check Detector Chamber
  • Region of Peel: Precast Rectangular Chamber – New Watermains (1-1-6)
  • Region of Peel: Precast Circular Chamber – New Watermains (1-1-5)

For information on the City of Toronto and/or the Region of Peel Chambers, please click here or contact us at 1-800-461-5632 or engineering@decastltd.com

Other Engineered Precast Products

You may think cast in place is your only option, you might be missing out on big cost and time savings.

Contact our team to create your Engineered Precast Solution: 1.800.461.5632 or engineering@decastltd.com